D-Link DAP-1665 Wireless AC1200 Dual Band Access Point
D-Link DAP-1665 Wireless AC1200 Dual Band Access Point
Technical Specifications General
Networking Standards
- IEEE 802.11ac
- IEEE 802.11n
- IEEE 802.11g
- IEEE 802.11b
- IEEE 802.11a
- 802.3/802.3u
Interface
- Draft IEEE 802.11ac wireless LAN
- IEEE 802.11n/g/b/a wireless LAN
- 10/100/1000BASE-TX wired LAN
Operating Modes
- Access Point (AP) • Bridge • Bridge with AP
- Wireless Client • Repeater
Antenna
- 2 x 2 dBi external antennas
LEDs
- Power
- 2.4 GHz wireless
- 5 GHz wireless
- LAN
Advanced Features
- Security
- 64/128-bit WEP
- WPA-PSK/WPA2-PSK
- Wi-Fi Protected Setup (WPS)
- MAC address filtering
- Kensington® security slot
- SSID broadcast disable
Device Management
- Web-based interface minimum requirements:
- Internet Explorer 7, Firefox 12.0, Chrome 20.0, or Safari 4.0
Physical
Dimensions
- 147 x 108 x 27.8 mm (5.79 x 4.25 x 1.1 inches)
Weight
- 222 grams (0.489 lbs)
Power
- Input: 12 V/1 A
- Consumption: Maximum 5.18 W
Temperature
- Operating: 0 to 40 °C (32 to 104 °F)
- Storage: -20 to 65 °C (-4 to 149 °F)
Humidity
- Operating: 10% to 90% non-condensing
- Storage: 5% to 95% non-condensing
Certifications
- CE • FCC • TELEC
- IC • Wi-Fi Certified • VCCI
Related Product
D-Link DPH-610G ENTERPRISE IP PHONE
ENTERPRISE IP PHONE
D-Link DWR-957M CAT 6 LTE Wi Fi AC1200 Mobile Router
CAT 6 LTE Wi Fi AC1200 Mobile Router
D-Link DAP-3410 Wireless N 5GHz Outdoor Access Point
The DAP-3410 Wireless N Exterior Access Point is the ideal solution for expanding the coverage and signal strength of any wireless network. Built to withstand harsh environments, the DAP-3410 also excels in connecting separate networks that cannot be joined physically using traditional medium. Multiple operating modes, network management tools, and security
features gives network administrators a wide range of choices for deploying the device, allowing for the addition of increased connectivity to wireless network-enabled devices.
Increased Network Connectivity And Throughput
Expand current wireless network capacity with the latest 5 GHz 802.11a/n wireless connectivity. In addition, two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion using traditional wired medium. The built-in 10 dBi sector antenna has a high power output6 ensuring that wireless coverage will cover even hard to reach locations. Whether you want to connect additional wireless devices such as smartphones or laptops, or bringing connectivity to networks separated by short distances, the DAP-3410 has it covered.
Flexible Deployment Options
The DAP-3410 features seven multiple operation modes, allowing it to adapt to any situation. As a standard wireless access point (AP) the DAP-3410 can connect to a wide range of devices that are 802.11a/n compliant. In wireless distribution system (WDS) mode it can expand current wireless coverage without the need for a wired backbone link. As a wireless client it can connect to an existing AP and expand the network physically with the two built-in 10/100 Ethernet ports. Repeater mode will extend current wireless coverage eliminating dead spots and weak signals. WISP mode functionality includes the ability to function as a client or repeater.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports up to 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a
useful function for deployments such as wireless hot spots. With station-tostation partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports upto 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a useful function for deployments such as hot spots. With station-to-station partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Robust Security And Management Tools
The DAP-3410 supports 64/128-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ accessto the internal network. Network administrators have multiple options for managing the DAP-3410, including HTTP and HTTPS. For advanced network management, administrators can use SNMPv1, v2c, v3 to configure and manage access points.
Power over Ethernet (PoE)
The DAP-3410 is powered by PoE5 which allows for convenient installation, especially in places where a power supply is not reliable or power cables are not available or easily set up. Also, the DAP-3410 can supply power to a connected D-Link surveillance camera through PoE, including the DCS-3716, DCS-6113, and DCS-7110 cameras.
..
D-Link DXS-F3500-32S High Density Data Center TOR Switch
High Density Data Center TOR Switch
..
..
D-Link DXS-F3500-64S High Port Density Data Center TOR Switch
High Port Density Data Center TOR Switch
D-Link DWR-921E Wireless N300 4G LTE Router
D-Link DWR-921E Wireless N300 4G LTE Router