D-Link DSL-2730U Wireless N 150 ADSL2+ Router
High-Speed Internet
The Wireless N 150 ADSL2+ 4-Port Ethernet Router is a versatile, high-performance router for home and the small office. With integrated ADSL2/2+ supporting download speeds up to 24 Mbps, firewall protection, Quality of Service (QOS), fast wireless LAN, and four Ethernet switch ports, this router provides all the functions that a home or small office needs to establish a secure and high-speed link to the Internet.
Ultimate Wireless Connection
The Wireless N 150 ADSL2+ 4-Port Ethernet Router provides wireless speeds that are much faster than 802.11g. Maximize wireless performance and stay connected from virtually anywhere at home and in the office. It supports WPA/WPA2 and WEP for flexible user access security and data encryption methods, and a built-in WPS button provides easy wireless setup.
Firewall Protection & QOS
Security features prevent unauthorized access to the home and office network from wireless devices or from the Internet. The Wireless N 150 ADSL2+ 4-Port Ethernet Router provides firewall security, such as Stateful Packet Inspection (SPI) and hacker attack logging. SPI inspects the contents of incoming packets before they are allowed in, while hacker logging helps to protect your network against Denial of Service (DoS) attacks. For Quality of Service (QOS), the router supports priority queues to enable a group of home or office users to experience the benefit of a smooth network connection without worrying about traffic congestion.
Compatibility Assurance
The Wireless N 150 ADSL2+ 4-Port Ethernet Router is backward compatible with existing 802.11b and 802.11g wireless equipment, ensuring compatibility with a wide range of wireless devices. In addition, this router includes four Ethernet ports ready for you to connect Ethernet-enabled PCs, print servers and other devices.
SPECIFICATION
DEVICE INTERFACES
- RJ-11 ADSL port
- 4 RJ-45 10/100BASE-TX Ethernet ports with auto MDI/MDIX
- Built-in Wireless N 150
- Factory reset button
- WPS button
- Wireless on/off switch
- Power on/off switch
WIRELES LAN
- 802.11b/g with some 802.11n features
- Wireless speed: up to 54 Mbps (802.11g), 150 Mbps (802.11n)
- Frequency range: 2.4 GHz to 2.484 GHz
- 64/128 bits WEP data encryption
- WPA/WPA2 (Wi-Fi Protected Access) security
- Multiple SSIDs
- Inbuilt QoS (WMM/WME)
- MAC address-based access control
ADSL STANDARDS
- ADSL standards: Multi-mode, ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) Annex A, ITU G.992.2 (G.lite) Annex A, ITU G.994.1 (G.hs)
- ADSL2 standards: ITU G.992.3 (G.dmt.bis) Annex A/L/M, ITU G.992.4 (G.lite.bis) Annex A ADSL2+ standards: ITU G.992.5 Annex A/L/M
ADSL DATA RATES
- G.dmt: 8 Mbps downstream, 832 Kbps upstream
- G.lite: 1.5 Mbps downstream, 512 Kbps upstream
- ADSL2: 12 Mbps downstream, 1 Mbps upstream
- ADSL2+: 24 Mbps downstream, 1 Mbps upstream
ATM & PPP PROTOCOLS
- ATM PVC (up to 8PVCs)
- ATM Adaptation Layer Type 5 (AAL5)
- ATM QoS (Traffic Shaping)
- Bridged or routed Ethernet encapsulation
- VC and LLC based multiplexing
- PPP over Ethernet (PPPoE)
- PPP over ATM (RFC 2364)
- ITU-T I.610 OAM F4/F5
ROUTER FEATURES
- NAT (maximum 4096 NAT sessions)
- DHCP server/client/relay
- Static Routing, RIP v.1, v.2
- Universal Plug and Play (UPnP) Compliant
- Dynamic Domain Name System (DDNS)
- Virtual Server
- SNTP, DNS proxy, and IGMP proxy
- Supports IPv6
FIREWALL
- Built-in NAT firewall
- Stateful Packet Inspection (SPI)
- DoS attacks prevention
- Packet filtering (IP/ICMP/TCP/UDP)
- Intrusion Detection System (IDS)
- DMZ
VIRTUAL PRIVATE NETWORK (VPN) DEVICE CONFIGURATION/MANAGEMENT
- Multiple PPTP/IPSec/L2TP pass-through
- Web-based GUI for configuration, firmware upgrade
- Code lock to prevent improper firmware upgrade
- Telnet
- Syslog monitoring
- WPS
QUALITY OF SERVICE
- WPS
- LAN to WAN traffic prioritization/Classification
- 802.1p (0 to 7) traffic prioritization
SECURITY
- IGMP Snooping with 32 Multicast groups
- PVC/VLAN port mapping (bridge mode)
- Parental Control (URL blocking, scheduling)
POWER INPUT DIAGNOSTIC LEDs
- Through 12 V AC 0.5 A external power adapter
- Power
- LAN (1 to 4)\
- WLAN
- DSL
- Internet
- WPS
DIMENSIONS
- 195.16 x 115.93 x 36.55 mm
- (7.7 x 4.6 x 1.4 inches)
OPERATING TEMPERATURE STORAGE TEMPERATURE OPERATING HUMIDITY
- 0 to 40 °C (32 to 104 °F)
- (-)20 to 70 °C (-4 to 158 °F)
- 5% to 95% non-condensing
Related Product
D-Link DPH-100 Phone Headset
DPH-100 Phone Headset
D-Link DAP-1330 Wireless N 2.4 GHz Range Extender
Extend Your Wireless Network
Easy to Set Up, Easy to Use
Compact, Convenient Design
..
D-Link DWR-953 Wireless AC750 4G LTE Router
Wireless AC750 4G LTE Router
D-Link DWR-510 3G 7.2 Mbps HSUPA USB Router
MBPS HSUPA USB Router..
D-Link ANT24-0502 5dbi Indoor Omni-Directional Antenna
5dbi Indoor Omni-Directional Antenna
D-Link DAP-3410 Wireless N 5GHz Outdoor Access Point
The DAP-3410 Wireless N Exterior Access Point is the ideal solution for expanding the coverage and signal strength of any wireless network. Built to withstand harsh environments, the DAP-3410 also excels in connecting separate networks that cannot be joined physically using traditional medium. Multiple operating modes, network management tools, and security
features gives network administrators a wide range of choices for deploying the device, allowing for the addition of increased connectivity to wireless network-enabled devices.
Increased Network Connectivity And Throughput
Expand current wireless network capacity with the latest 5 GHz 802.11a/n wireless connectivity. In addition, two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion using traditional wired medium. The built-in 10 dBi sector antenna has a high power output6 ensuring that wireless coverage will cover even hard to reach locations. Whether you want to connect additional wireless devices such as smartphones or laptops, or bringing connectivity to networks separated by short distances, the DAP-3410 has it covered.
Flexible Deployment Options
The DAP-3410 features seven multiple operation modes, allowing it to adapt to any situation. As a standard wireless access point (AP) the DAP-3410 can connect to a wide range of devices that are 802.11a/n compliant. In wireless distribution system (WDS) mode it can expand current wireless coverage without the need for a wired backbone link. As a wireless client it can connect to an existing AP and expand the network physically with the two built-in 10/100 Ethernet ports. Repeater mode will extend current wireless coverage eliminating dead spots and weak signals. WISP mode functionality includes the ability to function as a client or repeater.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports up to 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a
useful function for deployments such as wireless hot spots. With station-tostation partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports upto 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a useful function for deployments such as hot spots. With station-to-station partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Robust Security And Management Tools
The DAP-3410 supports 64/128-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ accessto the internal network. Network administrators have multiple options for managing the DAP-3410, including HTTP and HTTPS. For advanced network management, administrators can use SNMPv1, v2c, v3 to configure and manage access points.
Power over Ethernet (PoE)
The DAP-3410 is powered by PoE5 which allows for convenient installation, especially in places where a power supply is not reliable or power cables are not available or easily set up. Also, the DAP-3410 can supply power to a connected D-Link surveillance camera through PoE, including the DCS-3716, DCS-6113, and DCS-7110 cameras.
..