D-Link DSL-2877AL Wireless AC750 Dual Band
High-Speed Wired and Wireless Connectivity
The DSL-2877AL Dual Band 11ac ADSL2+ Four Port Wireless Router uses the latest high-speed wireless technology to bring you lightning-fast Wi-Fi speeds of up to 750 Mbps and increased range. Enjoy streaming media, Internet phone calls, online gaming, and content-rich web surfing throughout your home. In addition, four Fast Ethernet ports give you solid, dependable wired performance for devices such as media centers and game consoles. The built-in Quality of service (QoS) engine allows you to prioritize important traffic to ensure that your favorite applications are receiving optimal bandwidth.
Dual-Band Wireless for Seamless Performance
The DSL-2877AL features dual-band wireless, allowing you to operate two concurrent, high-speed Wi-Fi bands for ultimate wireless performance. Surf the web, chat, and play online games on the 2.4 GHz band, while simultaneously streaming digital media on the 5 GHz band. What’s more, each band can operate as a separate Wi-Fi network, giving you the ability to customize your network according to your connectivity needs. You can even configure a guest zone to give visitors Internet access without giving them access to the rest of your network.
Easy to Set Up, Easy to Secure
Sharing your Internet connection doesn’t have to be a complicated process; just open a web browser to access the setup wizard and follow the easy step-by-step instructions to get started. Implement WPA/WPA2 wireless security in minutes with the wireless network setup wizard, or use Wi-Fi Protected Setup (WPS), which establishes a secure connection to new devices without the need to enter settings or create passwords. In addition, the built-in firewall protects against malicious attacks from the Internet, and access control features allow you to restrict access to your network.
SPECIFICATION
Device Interfaces
- 10/100/1000 Gigabit Ethernet WAN port
- 802.11 ac/n/g/b Wireless LAN
- Four 10/100 Fast Ethernet LAN ports
- RJ-11 ADSL port
- Two USB 2.0 ports
ADSL Compliance
ADSL Standards
- Multi-mode
- Full-rate ANSI T1.413 Issue 2
- ITU-T G.992.1 (G.dmt) Annex A/C/I
- ITU-T G.992.2 (G.lite) Annex A/C
- ITU-T G.994.1 (G.hs)
ADSL 2 Standards
- ITU-T G.992.3 (G.dmt.bis) Annex A/J/K/L/M
ADSL 2+ Standards
- ITU-T G.992.5 Annex A/L/M
ATM/PPP Support
- Multiprotocol over AAL5 (RFC 1483/2684)
- Bridged and routed Ethernet encapsulation
- LLC encapsulation
- VC-based multiplexing
- ATM Forum UNI3.1/4.0 PVC (up to 8 PVCs)
- ATM Cell Format ITU-T Rec. I.361
- ATM Adaptation Layer Type 5 (AAL5)
- PPPoA (RFC2364)
- PPPoE (RFC2516)
- PPP Link Control Protocol (RFC 1661)
- Internet Protocol Control Protocol (RFC 1332)
- PPP Authentication Protocol (RFC 1334)
- PPP Challenge Handshake Authentication Protocol (RFC 1994)
- Microsoft PPP CHAP extensions (RFC 2433)
WLAN Specifications
- 802.11 n/g/b, up to 300 Mbps
- 802.11 ac/a, up to 433 Mbps
- Wi-Fi Protected Setup (WPS)
- Multiple SSIDs
- Automatic rate adapting
- WAN scheduling
- Auto channel selection
- WMM support64-bit & 128-bit WEP
- WPA-PSK & WPA2-PSK
- MAC address filtering
Network Services
- IPv4
- DHCP server/client/relay
- DNS relay
- Dynamic DNS (DDNS)
- Routing Information Protocol (RIP) v1/v2
- NAT AGLs
- PPTP
- L2TP
- FTP
- RTSP (RealTime Streaming Protocol)
- SIP v1/v2
- IPsec
- Internet Control Message Protocol (ICMP)
- Virtual server (Port forwarding)
- Simple Network Time Protocol (SNTP)
- 802.1d MAC Bridge (up to 256*8 MAC addresses)
- QoS
- IPP/ToS
- DSCP QoS in 4-priority queues
- Application QoS in 4-priority queues
- Strict priority
- VLAN QoS in 4-priority queues
- QoS remarking based on IPP/ToS, DSCP and 802.1p
- TOS transparency through NAT
- Mapping to queue according to DSCP bits and physical port
- 802.1Q
- IGMP proxy v1/v2
- IGMP snooping v1/v2/v3
Standards
- IEEE 802.11ac
- IEEE 802.11n
- IEEE 802.11g
- IEEE 802.11b
- IEEE 802.3
- IEEE 802.3u
Universal Plug and Play Support
- UPnP based auto-configuration
- UPnP based port forwarding
- UPnP IGD 1.0
Security
- Attack Prevention
- Port scanning & illegal packet attack
- DoS Attack
- SYN Flooding
- Ping of Death
- Teardrop
- LAND attack
- IP Spoofing
- IP with zero length
- Smurf Attack
- TCP Null Scan
- Stateful Packet Inspection (SPI)
- Management Access Control for LAN/WAN sides
- IP filtering
- MAC filtering
- URL filter
- Demilitarized Zone (DMZ)
Device Management
- Web configuration
- Telnet management
- Webpage/X-Modem/FTP/TFTP firmware upgrade
- Diagnostic tools for ADSL and IP Ping
- One Touch Setup wizard
Advanced Features
- Multi-language web setup wizard
- UPnP support
- 802.1p QoS
- VPN pass-through/multi-session PPTP/L2TP/IPSec
- Dual-active firewall
- Network Address Translation (NAT)
- Stateful Packet Inspection (SPI)
Dimensions
- 198 x 146 x 54 mm
Weight
- 302 grams
Temperature
- Operating: 0 to 40 °C
- Storage: -20 to 65 °C
Humidity
- 5 % to 95 % non-condensing
Certifications
- CE
- Wi-Fi
- RCM
- Wi-Fi Protected Setup (WPS)
- A-Tick
- C-Tick
Related Product
The DSL-245GR Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router is everything you need for high-speed Internet access for your entire home. It combines an ADSL2+/VDSL2 modem and high-end wireless router together to create a single, easy to use device that creates and shares an Internet connection for all your devices.
Fast and Reliable Home Network
The D-Link DSL-245GR Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router create a blazing fast home network that connects all of your devices to your broadband Internet connection. Concurrent dual-band Wave 2 MU-MIMO 802.11ac brings you the future of high-bandwidth wireless connectivity, allowing you to stream HD video, make Internet voice calls, and surf the Internet from every corner of your home without interruption. Gigabit Ethernet ports provide high-speed wired connections for up to four PCs or other devices. It’s stylish, easy to use, and provides you with a reliable network for today and tomorrow.
Multiple Failover Redundancy and Future Connectivity
The D-Link DSL-245GR Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router support 35b Super vectoring Profile or Vplus that enables the model to reach a dazzling speed up to 300 Mbps over the VDSL copper network. DSL-245GR is also equipped with a 4 Port Gigabit Ethernet LAN switch and one USB 2.0 port which support 3G/4G mobile broadband adapters. This means that if your primary connection method fails, the DSL-245GR will automatically fall back to your predefined 3G/4G backup connection.
..
The DAP-3410 Wireless N Exterior Access Point is the ideal solution for expanding the coverage and signal strength of any wireless network. Built to withstand harsh environments, the DAP-3410 also excels in connecting separate networks that cannot be joined physically using traditional medium. Multiple operating modes, network management tools, and security
features gives network administrators a wide range of choices for deploying the device, allowing for the addition of increased connectivity to wireless network-enabled devices.
Increased Network Connectivity And Throughput
Expand current wireless network capacity with the latest 5 GHz 802.11a/n wireless connectivity. In addition, two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion using traditional wired medium. The built-in 10 dBi sector antenna has a high power output6 ensuring that wireless coverage will cover even hard to reach locations. Whether you want to connect additional wireless devices such as smartphones or laptops, or bringing connectivity to networks separated by short distances, the DAP-3410 has it covered.
Flexible Deployment Options
The DAP-3410 features seven multiple operation modes, allowing it to adapt to any situation. As a standard wireless access point (AP) the DAP-3410 can connect to a wide range of devices that are 802.11a/n compliant. In wireless distribution system (WDS) mode it can expand current wireless coverage without the need for a wired backbone link. As a wireless client it can connect to an existing AP and expand the network physically with the two built-in 10/100 Ethernet ports. Repeater mode will extend current wireless coverage eliminating dead spots and weak signals. WISP mode functionality includes the ability to function as a client or repeater.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports up to 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a
useful function for deployments such as wireless hot spots. With station-tostation partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Fine-Tuned Control Over Network Resources
The DAP-3410 supports upto 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The DAP-3410 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3410 provides WLAN partitioning, a useful function for deployments such as hot spots. With station-to-station partitioning enabled, security is enhanced, since wireless users cannot peek at each other, and the possibility for data theft is reduced.
Robust Security And Management Tools
The DAP-3410 supports 64/128-bit WEP data encryption and WPA/WPA2 security functions. In addition, it provides MAC Address Filtering to control user access, and the Disable SSID Broadcast function to limit outsiders’ accessto the internal network. Network administrators have multiple options for managing the DAP-3410, including HTTP and HTTPS. For advanced network management, administrators can use SNMPv1, v2c, v3 to configure and manage access points.
Power over Ethernet (PoE)
The DAP-3410 is powered by PoE5 which allows for convenient installation, especially in places where a power supply is not reliable or power cables are not available or easily set up. Also, the DAP-3410 can supply power to a connected D-Link surveillance camera through PoE, including the DCS-3716, DCS-6113, and DCS-7110 cameras.
..